2. Cut strips of adhesive to form the band, strips can range from one to three inches wide, depending on the size of the pumpkins. Tip: Visually, it's best if the adhesive strips cover approximately one-third of the pumpkin.

3. Remove one side of paper from the adhesive and wrap around the middle of the pumpkin. Remove the remaining paper backing. Add additional strips of adhesive until there is a continuous band around the middle of the pumpkin.

4. Roll the exposed adhesive in the lentils, pressing the lentils into the adhesive to affix. Use fingers to place additional lentils in areas where they do not completely cover the adhesive.

5. Press all lentils gently to make sure they are secure and repeat for remaining pumpkins.

6. Cut strips of adhesive that equal the height of each candle, minus two inches.

7. Wrap the adhesive around the candles in the same manner as the pumpkins, leaving an inch of candle color exposed at the top and bottom and roll the exposed adhesive in the lentils to cover.

8. To create a colorful tablescape, pour additional lentils onto table in a colorful pattern. Place pumpkins and candles on the bed of lentils. Raise some pumpkins and candles by placing them on stands or candleholders.

Note: To store this decoration for future use, wrap candles and pumpkins in wax paper to keep lentils attached and store in a cool, dry place.